Getting Down To Basics with Cutting

4 Known Benefits of Using Water Jet Cutting

When it comes to metal cutting, there are lots of ways that this task can be done. Some have a simple design and some are crude as hack saw and there are also into more technical like plasma and laser cutting tools. Of course, similar to other metal cutting technologies and products, there are also downsides to each.

These could just be anything from heat that results to deformities with cut line to rough mess edges all over. Furthermore, there are items that can’t be cut using simple and standard methods which is why water jet cutting is put into used. This method has provided so many benefits which would be explained in the following paragraphs.

Number 1. No heat – in comparison to other known methods, water jet cutting doesn’t create heat. What this actually mean is that, you won’t see any warping, distorting or melting on edges which helps a lot in making precision cuts even on the most complicated parts.

Number 2. Precision – this method as what said earlier provides extreme precision. Whether you believe it or not, this particular technology has a tolerance of 0.005″ when cutting. Obviously, you need to know that this technology isn’t cheap and given the fact that it has high precision not like everything else, the cost of set up and materials required for cutting is proportion to it too. But the good news with this, it’s doable. The fact that cutting is monitored and managed by specialized software installed in a computer makes everything so precise.

Number 3. Versatility – there are so many ways that work beautifully with different materials but not with others. Water jet cutting lets the cutting of almost any materials effectively. A well known exception is the tempered glass and it is likely that there are several specialized materials it would not work with. But some materials that it is capable to cut with high precision includes steels, all kinds of marble, wood, composites, aluminum, plastics and rubber.

Number 4. Clean up and time – another awesome benefit of using this technology is its clean up. Due to the reason that there’s no slag as well as little to no burr on parts, there’s little need for doing cleanup or even secondary finishing operation like sanding or grinding. This as a result made the cutting quicker and gets the job done faster than other cutting technologies.

There are many other benefits as well that are associated with water jet cutting and some of these include but not limited to structural properties of materials aren’t affected as it’s cold cutting, high speed for faster completion of the job and fast turnaround time from drawing board to cutting the product.

Interesting Research on Waterjets – What You Didn’t Know

If You Think You Understand Cutting, Then Read This

Leave a Reply

Your email address will not be published. Required fields are marked *